Coimbatore Paint Stores (Pipe)

Leader ’Y’ type Strainer offers best solution for separation and segregation for pump protection, flow meter protection, valves protection, regulator protections. In water handling equipment it works to save from damage through sand or any other solid particles.

• Designed to manufacturer standard.
• Y’ Type pattern, Bolted Cover.
• SS (Type 304) Screen Having 1mm Dia Perforation snugly fitted on machined surface to ensure no particle larger than the screen opening can escape around the end of the screen.
• Filtration area approximately 3 times more than flow bore area of the body.
• Body cavity with largest possible filtration area to counter decrease in flow rate caused by clogging.
• Fine finish and smooth contours of flow way reduce the pressure drop.
• Screen is guided both in body and cover.
• Strainer may be installed in vertical lines and horizontal lines with effectiveness.
• Drain plug is provided on the valve to drain out the foreign particles accumulated in the strainer.
• Screw end & Flanged ends to BS 10 Table ’E’ (FF).

Screwed end  Stainless steel  Y type Strainer are stringently tested on several parameters to ensure their flawlessness before delivering at clients' desired destination. These products are highly durable and can also be customized as per the specifications mentioned by the valuable patrons.

PP Y strainer" refers to a Y-shaped strainer made from polypropylene (PP) plastic, used in piping systems to filter out large particles from flowing liquids, essentially acting as a protective device for downstream equipment by removing debris before it can cause damage; the "Y" shape describes the configuration of the strainer, resembling the letter Y, and the PP material provides chemical resistance making it suitable for corrosive fluids.

CAST IRON POT STRAINER , Cast Iron (IS:210 FG 200) , POT Strainer Stainless Steel Screen With Meshes Drilling as per is 1538 PN-1.0 Body tested to 15 Kg/cm2